We arrive at your home with a fully equipped work van (we'll need space in your driveway for the van).

A uniformed technician, certified by NADCA, will introduce himself and the other technicians with him.

To protect floors and carpeting, a drop cloth put at entry door to dust off shoes, Shoes can be removed or covered with booties if required by weather or customer preference.

Technician does a walk-through with the owner to assess the layout, describe the work to be done, and answer any questions that may arise.

We run the heating and cooling equipment through a cycle to verify that it is operational

Technician determines air duct layout and evaluates accessibility

Access openings, if needed, are created in solid ceilings such as fixed tiles or drywall (customer’s responsible for providing access opening if needed)

Technician will then cover effective areas with drop clothes and (with help of owner) moves any furniture and or other objects to provide access for cleaning.

Technician places drop cloths protective coverings on furniture closest to and flooring directly under each register grills.

Technician unloads HEPA vacuum and other equipment that will be needed on the job

HEPA vacuum is attached to either the supply main or the return main. HEPA vacuum is attached to HVAC system, plenum, or registers (best location for required results). The two sides of your system are cleaned separately.

Technician removes all registers and cover openings with zone tape to prevent ‘blow-back’ during the cleaning

Technician then takes registers and return grills, and other components outside for cleaning using pressure washer with cleaning agents

HEPA vacuum is turned on to create a strong negative air flow throughout your air duct system. The HEPA vacuum-induced air flow continues during the entire cleaning process.

Technician assembles a power-driven rotary brush tool. The brush head is always cleaned and sanitized before use.

Agitation tools such as brushes, whips and air snakes must be run back and forth across every square inch of every interior surface in each duct. The loosened dust and debris is then carried by the air flow down to the branch line and trunk lines to the HEPA vacuum where it is captured.

Floor or ceiling registers and the power-driven rotary brushes or passed through either (hard pipe or flex) ducts leading to the trunk line or plenum which are brushed out by this application

Technician uses cutting tools to create a series of (12”) access openings in the supply or return trunk line for the continued use of agitation tools to loosen dirt and debris so the negative air flow can carry it to the HEPA vacuum. 6” to 12” Circular Holes are cut in Metal or 8” to 16” Pumpkin Cut into Fiber Board Duct Work.

Even though agitation tools have already been skillfully applied to every (hard pipe or flex) duct surface, the Technician then takes the next step of applying the rotary brush throughout both the main ducts or in most cases hand vacuum the smaller Plenums.

The HVAC systems furnace blower and blower compartment are then accessed and cleaned

To insure a thorough cleaning, the technician then removes the blower from the blower compartment if possible. Then removes the Blower motor from squirrel cage and cleans thoroughly before reassembling blower

If the system has air conditioning, the plenum (usually just above the furnace) is opened to give the Technician access to the evaporator coil of the air conditioning system. Access Doors can be provided if customer chooses it as an entry point for further coil cleaning. Access Doors may require additional cost.

Technician vacuums, cleans and washes the evaporator coils using a (Type 1) coil cleaning processes and vacuums out and cleans the evaporator coil, the drain pan beneath it and drain line.

Depending on the condition of the coil a (Type 2) coil cleaning may be required. The evaporator coil is to be pulled be a Licensed HVAC contractor which could result in additional cost or replacement if needed. We rely on the owners HVAC Contractor to perform this task if home owner doesn’t have a HVAC Contractor we will recommend one for the service.

To insure a thorough cleaning, the technician then removes the Filter Grill for cleaning. Hand Vacuums with HEPA Vacuum the HVAC Re-Turn for dust and other contaminates.

If the job includes it, the Technician then cleans the burners, the combustion chamber and the interior of the heat exchanger on the furnace and coated with Fosters 40/20 after cleaning.

Technician will fog your duct system with a Micro-Biocide to kill any living organism within your ducts it’s also (a disinfectant) and deodorizer the inside of the duct work.

Foster 40-20 Fungicidal Protective Coating is then applied as or encapsulate on the insulated interior lining of all Trunk line, plenum’s, returns and all drop boxes. Fungicidal protected coating to keep any mold, mildew and bacteria from reoccurring

2 ½”and 4” access openings if needed are sealed with injection molded pop-in plugs and Mastic tape

Larger access openings in Fiber Board Trunk Lines are replaced back, sealed with Mastic tape and Fiber Mastic is applied to covers as to prevent air seepage and return ducts to a like-new condition.

Technician reassembles all components and removes all equipment drop clothes, supplies then are removed from the jobsite and stowed back in the work van.

Technician runs heating and cooling equipment through a cycle once again to verify that it is operational

If the customer has a clean replacement filter the Technician installs it (Healthy Air Duct Cleaning does not reinstall dirty filters and does not sell or carry replacement filters). For best results we recommend using 1” Pleated Filters with a MERV Rating of no greater than 800 and change out every 30 days like normal.

Technician applies a service sticker showing date of cleaning, Technician names, and suggested date for next cleaning, along with recommended filter type and size information.

Technician conducts a final walk-through, and looks for any equipment, drop cloths; furniture is put back in place making sure no equipment is left behind, then HEPA Vacuums the entire home to pick up any residual containment that may be left on flooring during the process.

After technician conducts a final walk-through, requests customer signoff on Service Order and receives payment, Thanks Customer and departs.

Customer is asked if we can place a yard sign in the front yard to let all there Nabors know that they are Breathing Healthier and they can too!!!!!